● Specifications
Product Name Mobile power station for iphone 4/4s etc
Product Capacity 1800mAh
Lithium-polymer batteries
Input 5V, 500A
Output 5V, 1A
Weight 77g
more than 30 hours music playback
Talk time 7 hours
Internet 6 hours
over 10 hours video playback
Product size 90 × 63 × 14mm
● Charging time
1 separate charge for the product, about 4 hours.
2 Connect the iPhone while charging, will give priority to charge iPhone, and then give the product charge, about 6-7 hours.
Charge to this product
1 with the cable supplied with this product or any computer with a USB output socket (standard iPhone 4 USB adapter) to connect to, charging time is significantly blue lights and LED lights flash cycle, after the Lantern Festival is full of has been lit.
(2) When the iPhone 4 connection with this product while charging, charging the power to give priority to iPhone 4, iPhone 4 to be fully charged (this process is about 3 hours), the power will automatically be charged to this product.
3 When the control switch off, only to charge the product, and the data transfer.
Charge to the iPhone 4
1 iPhone 4 will be inserted correctly with this product.
(2) After connection, iPhone 4 to identify the product and start charging, while the iPhone 4 charging sign appears on the screen, and issued charging sound.
3 until the iPhone 4 fully charged, press and hold control switch for 3 seconds, you can turn off the power, standby power saving mode.
4, such as iPhone 4 power runs out, this product will give priority to charge iPhone 4, iPhone 4 is fully charged, the product will replace the iPhone 4 built-in batteries as main power until your battery runs out, before that, iPhone 4 of power is not affected.
● use of intelligent control switch
1 The product with intelligent switching with intelligent control systems, intelligent switch is turned on by default.
(2) When the switch is open, intelligent, iPhone 4 will give priority to the electricity use of the product.
3 When the iPhone 4 connection with this product while charging, press and hold control switch for 3 seconds, you can turn off the smart switch that off on the iPhone 4 charge, press and hold control switch for 3 seconds, you can open the intelligent switch, which resume iPhone 4 charge.
● data synchronization
When the product used simultaneously with the iPhone 4 connection, you can still connect via the supplied cable, connect the PC and iTunes synchronization data manipulation without the need to remove the product.
Note
1 when not using the product, at least every three months to one charge of this product.
(2) all the bright lights to be charged, unplug the charger plug, to avoid damage to the battery charging time.
3 at ambient temperature 0-45 ℃, relative humidity 20-70% RH in the case use, and away from moisture, heat and fire.
4 Keep the product stored in a dry place, away from moisture and corrosive materials.
5 Do not use rough chemicals, such as soap or detergent scrub.
6 prohibited the demolition of this product, impact, in fire or water.
7 If found that the battery swelling, leaking or smell, immediately stop using.
|
|
|
|
| Select Image |
 |
|
|
|
|
