Product features:
Carry way: on the travel bag ,computer bag or in the car.
Battery indicator: 4LED lights display battery.
Charging display:When charging 0-25%,a light flashing,others doesn’t light,when charging to 25%-50%,the second light flash,the first light become constant light , when charge to 50%-75%,thethirdd light flash,the first two lights become constant light , when charging to 75%-100%,the foueth light flash,the first third lights become constant light ,all four lights lit charge to 100%.
Charging Method: Use the original power adapter by adding charhing adapter to give direct charge of the product.
Applicable equipment : to give all the devices with USB charging,such as mobile phones,PSP,IPOD.IPHONE,IPAD,MP4,PMP,GPS,Bluetooth, digital cameras.
Discharge display: long press the power button,4LED lights flash at the same time for 3 times then long bright. Then carge for all devices with USB charging.
Easy to use
1. Selecte the corresponding voltage for digital products
2. Selecte the corresponding adapter for digital products
3. Insert the adapter to the digital products.
4. Display the battery accurately.
5. Long life time.
6. No memory efficiency.
7. Long cycle times. Up to 500 time .Even more than 500 times,it can ensure 80% of electricity.
8. Safety and reliability.
9. This product adopt the world’s leading lithium battery technology ,are eco-friendly,safe,non-toxic risk.
10. Intelligent automatic short circuit protection design,all the blocks are connected with a short-circuit protection.
11. Blutooth 3.0 transmissiont,the connection is faster.
Keyboard usage:
1. Insert the Bluetooth receiver into the USB interface of the corresponding computer,if connected devices have built-in Bluetooh receiver, it’s no need for this step(such as the Samsung P1000, IPAD which don’t need bluetooth receiver)
2. (1) Turn on the power swith of Bluetooth keyboard,display lights up.
(2) Click on the frequency switch,in this way indicator will flash.
3. Open Bluetooth of the connected devices,and began to search for bluetooth keyboard of YLS-811.Connected devices will search for it automatically,the system will pop up the corresponding dialog box and display the appropriate security coad, input dialpg box prompts security code in the Bluetooth keyboard and press ENTER ,it says the connection is successful, while the keyboard lamp stops flashing.
4. After properly connected,usually, the computer will install some driver files automatically,then it can be used normally.
Notes
1. Do not adjust the output voltage above the device voltage, which may cause damage to the equipment, please make sure to check before use.
2. Please use the specified charger.
3. Against short circuit,break dowm and thrown into the fire.
4. Not allowed to disassemble the charger and battery or transform it.
5. Pay attention to moisture and water.
Product Specific Parameters:
Product Type: BPK-YLS811 Charging time:8-10hours. Output: 5V/1.5A 5V/800mAh Input:5V/1.5A
Working temperature: -10℃--40℃ Storage and carry temperature: -20℃--50℃
Capacity: 10000mAh L ithium-polymer battery Volume: 220*106*14.5mm
Weight: 600gram.
This product is a high-capacity portable digital mobile power with a bluetooth keyboard:
YLS-811 imported high-performance polymer batteries,the capacity can be achieved 10000mAh,which combines the dual charger and backup battery,Bluetooth 3.0 transmission.With USB output.through choosing different output line by adding optional adapter, it can give charge for mobile phones,game consoies,IPOD,IPHONE,IPAD,PDA,MP4,MP5,PMP,MID and other devices with USB charging; charging by using on the computer. The charge is very convenient to use,which can resolve the equipment trouble of without electricity anywhere,anytime for you.
|
|
|
|
| Select Image |
 |
|
|
|
|
